- Refinement Behavior of Coarse Magnesium Powder by High Energy Ball Milling (HEBM)
-
Joon-Woo Song, Hyo-Seob Kim, Hong-Moule Kim, Taek-Soo Kim, Soon-Jik Hong
-
J Korean Powder Metall Inst. 2010;17(4):302-311.
-
DOI: https://doi.org/10.4150/KPMI.2010.17.4.302
-
-
22
View
-
0
Download
-
4
Citations
-
 Abstract
 PDF
- In this research, the refinement behavior of the coarse magnesium powders fabricated by gas atomization was investigated as a function of milling time using a short duration high-energy ball milling equipment, which produces fine powders by means of an ultra high-energy within a short duration. The microstructure, hardness, and formability of the powders were investigated as a function of milling time using X-ray diffraction, scanning electron microscopy, Vickers micro-hardness tester and magnetic pulsed compaction. The particle morphology of Mg powders changed from spherical particles of feed metals to irregular oval particles, then platetype particles, with increasing milling time. Due to having HCP structure, deformation occurs due to the existence of the easily breakable C-axis perpendicular to the base, resulting in producing plate-type powders. With increasing milling time, the particle size increased until 5 minutes, then decreased gradually reaching a uniform size of about 50 micrometer after 20 minutes. The relative density of the initial power was 98% before milling, and mechanically milled powder was 92~94% with increase milling time (1~5 min) then it increased to 99% after milling for 20 minutes because of the change in particle shapes.
-
Citations
Citations to this article as recorded by  - Quantitative Study on the Refinement Behaviors of TiC Powders Produced by Mechanical Milling Under Different Impact Energy
Sung-Mo Hong, Eun-Kwang Park, Kyeong-Yeol Kim, Jin-Ju Park, Min-Ku Lee, Chang-Kyu Rhee, Jin-Kyu Lee, Young-Soon Kwon
Journal of Korean Powder Metallurgy Institute.2012; 19(1): 32. CrossRef - Fabrication of Fe coated Mg Based Desulfurization Powder by Mechanical Alloying Process
Joon-Woo Song, Otaduy Guillermo, Byong-Sun Chun, Soon-Jik Hong
Journal of Korean Powder Metallurgy Institute.2012; 19(3): 226. CrossRef - Characteristics of Indium Dissolution of Waste LCD Panel Powders Fabricated by High Energy Ball Milling (HEBM) Process with Milling Time
Hyo-Seob Kim, Jun-Je Sung, Cheol-Hee Lee, Hyun-Seon Hong, Soon-Jik Hong
Journal of Korean Powder Metallurgy Institute.2011; 18(4): 378. CrossRef - Microstructure and Mechanical Properties of Nano-sized Ti-35%Nb-7%Zr-10%CPP Composite Fabricated by Pulse Current Activated Sintering
Kee-Do Woo, Duck-Soo Kang, Sang-Hyuk Kim, Sang-Hoon Park, Ji-Young Kim, Hye-Rim Ko
Journal of Korean Powder Metallurgy Institute.2011; 18(2): 188. CrossRef
|
kpmi
